Fender "häkeln"?

  • Hallo. Schöne Idee. Hoffentlich gibt es dann schnell ein paar Bilder so wie etwas weiter oben gezeigt zu sehen.Es regt doch immer das Interesse wenn man sich das auch Bildhaft vor Augen führt. Da kann man sich doch von den Kindern helfen lassen.LG Kurt :bild: :wink: :wink:

  • :kratz: Jeden ...Rockträger ,also Spezialist auf dem Gebiet stricken :pf: den Ich bis jetzt gefragt habe , der auch mit dem Teil gestrickt hat , sagt mir das geht nicht !
    Man kann nur Schläuche damit herstellen ... :dno:

  • Stimmt, leider ist meine Experiment mit einer 8er Strickliesel kläglich gescheitert.


    Es geht nicht. So nicht.


    Im April treffe ich ja die Gabi wieder (Frau von Kuddellmuddel) auf der Intermodellbau. Die werde ich mal fragen.

  • Zitat

    Original von Bilgenratte
    :kratz: Jeden ...Rockträger ,also Spezialist auf dem Gebiet stricken :pf: den Ich bis jetzt gefragt habe , der auch mit dem Teil gestrickt hat , sagt mir das geht nicht !
    Man kann nur Schläuche damit herstellen ... :dno:


    Genau das ist der Punkt! Das kann man nur durch das freie Häkeln per Hand so herstellen, dass es echt aussieht. Mit relativ dünnem Faden und kleinem Häkelhaken. Und vor allem........das dauert. Deshalb sind die auch nicht so billig.
    Meine oben beschriebene Bauweise will wohl keiner ausprobieren? Is wohl zu einfach und geht auch viel zu schnell. :lol:


    Mfg Siggi

  • Zitat

    Original von ErklärBär


    Genau das ist der Punkt! Das kann man nur durch das freie Häkeln per Hand so herstellen, dass es echt aussieht. Mit relativ dünnem Faden und kleinem Häkelhaken. Und vor allem........das dauert. Deshalb sind die auch nicht so billig.
    Meine oben beschriebene Bauweise will wohl keiner ausprobieren? Is wohl zu einfach und geht auch viel zu schnell. :lol:


    Mfg Siggi



    :weglach: vollkommen richtig !

  • Moin zusammen,


    ich bin einmal so frei hole die ollen Kamellen wieder raus. :lol:


    Mich beschäftigt zur Zeit das Thema Dekor, Detail, Accessoires etc. Im Netz, in der Bucht, bei den Amazonen und in vielen anderen gut bestückten Läden findet man viele tolle kleine Dinge, die uns bekanntlich das Herz aufgehen lassen :love:<3 , allerdings die Geldbörse nicht unbedingt schonend behandeln :cry: .


    Ganz einfaches Beispiel: Ich wollte mir neulich Fender besorgen. Das verfügbare Angebot war mir persönlich allerdings gerade ein wenig über Budget. Daher habe ich online mal nach Anleitungen zum Selbermachen gesucht, da ich gerne sagen möchte, das ich (fast) alles am Modell selber gemacht habe. Leider war ich mit meinen Suchergebnissen nicht zufrieden. :ccc:


    Da kam eine nette Stimme von der Seite in Form meiner Partnerin, die mir bei schon mancher gedanklichen Sackgasse heraus geholfen hat. <3 Sie erzählte mir von dem Vater ihrer Freundin als sie noch klein war, der Tierchen mit der so genannten "scoubidou"-Technik geflochten hat. :sh: Also wieder die große Suchmaschine angeworfen und danach geforscht. Sah auf den ersten Blick auch nicht kompliziert aus. Was gab es denn schon zu verlieren? :dno:


    Meine ersten Versuche habe ich einmal fotografiert und stelle sie hier einmal ein. Zum Größenvergleich soll der EURO nebenan dienen.
    IMG_0599.JPG


    Es sieht für mich noch nicht sehr überzeugend aus, ich schiebe es allerdings auf den Bindfaden bzw. die Paketschnur, die ich verwendet habe. Diese ist doch recht dünn und filigran. Ich werde mir demnächst im Schreibwarengeschäft verschiedene Schnüre mit unterschiedlichen Stärken zulegen. Ich vermute, dass das Ergebnis dann auch anders (besser?) aussieht.


    Was sind eure Meinungen dazu? Wäre diese Fender brauchbar?


    Grüße

  • Moin Mike,


    such mal im Netz nach 'Stricklisel'. Mit deren Hilfe kann man kleine Schläuche erstellen die sich dann mit Watte füllen lassen.


    Gruß
    Gerald

    AUF DER WERFT
    2-Mast Schoner Emma C. Berry (Restaurierung)
    4-Mast Bark Archibald Russell (Restaurierung)
    IM HAFEN

    Micro Magic Carbon Edition
    IN PLANUNG
    Brigg Tre Kronor af Stockholm (1:25 Neubau)
    Y-857 (ex FL6) (Restaurierung)
    Bugsier 3 (Restaurierung)

  • ich seh gerade den Tipp gabs weiter oben auch schon :)

    AUF DER WERFT
    2-Mast Schoner Emma C. Berry (Restaurierung)
    4-Mast Bark Archibald Russell (Restaurierung)
    IM HAFEN

    Micro Magic Carbon Edition
    IN PLANUNG
    Brigg Tre Kronor af Stockholm (1:25 Neubau)
    Y-857 (ex FL6) (Restaurierung)
    Bugsier 3 (Restaurierung)

  • Moin Gerald,


    ja habe ich auch bereits gelesen, finde ich gut den Hinweis. :2: Eine Strickliesel lässt sich bestimmt in der Familie noch auftreiben. :nick:


    Gerade für den Bugfender mit seiner zulaufenden und abnehmenden Form ist meine Arbeit nicht geeignet. Ich habe im Netz allerdings schon gesehen, dass verschiedene Formen mit der Technik möglich sind (sein sollen :kratz: ).


    Wenn ich eine "Liesel" auftreiben konnte und erste Stücke präsentieren kann melde ich mich mal wieder zu Wort. ;)


    Grüße

    Leichtmatrose an Neckar, Kocher & Jagst


    In Planung:
    A1414 Glücksburg (Typ 701 C)


    Im Trockendock:
    U.S.S. Iowa (BB-61) 1:200 [Semi-Scale] "the big stick"


    In der Werft:
    U.S.S. New York (LPD-21) 1:200 [Semi-Scale] "never forget"
    robbe "Schütze"

  • Häkeln? Stricken? In der Schiffahrt wird geknotet!!!!!!
    Auch wenn es verdammt ähnlich ist, es sieht mit Knoten einfach besser aus!!
    (dauert allerdings länger)


    Beispiele z.B.:
    Im Ashley Book of Knots
    https://ia801906.us.archive.or…y%20book%20of%20knots.pdf
    Ausschnitt:
    https://www.schiffsmodell.net/…f638ae4e376acdaf80698.jpg
    Nr. 3544 ist typisch für Fenderummantelungen (z.B. Rundstab) .


    Hier gibt's ein Beispiel für den Bugfender:
    https://www.schiffsmodell.net/…sboot-l%C3%BCbeck/&page=3


    Soweit meine 25ct dazu.
    VG
    Joerg

    In der Werft: TyneLifeboat, Bootshaus, Slipway 1:20, 9,5m SRB Trainingsboot, 1/72 Severn (Airfix), 1/72 + 1/87 Springer Tug, Shannon 1/12
    Im Hafen:
    Seenotretter Ponton mit Open Ship Diorama 1:20 (Eigenentwurf), 7m SRB GESINA 1:10 - 7m SRB MAX CARSTENSEN 1:20 - 9.5m SRB WILMA SIKORSKI 1:20 - MRB LÜBECK 1:20 - Springer Tug aus PS 1:20 + Schubleichter 1:20, Century 750 Segler
    Wo: www.smc-elmshorn.de ...

  • Hallo Jörg,


    das Buch ist der Hammer !! Danke.


    Gruß
    Gerald

    AUF DER WERFT
    2-Mast Schoner Emma C. Berry (Restaurierung)
    4-Mast Bark Archibald Russell (Restaurierung)
    IM HAFEN

    Micro Magic Carbon Edition
    IN PLANUNG
    Brigg Tre Kronor af Stockholm (1:25 Neubau)
    Y-857 (ex FL6) (Restaurierung)
    Bugsier 3 (Restaurierung)

  • Guck mal hier:

    Externer Inhalt www.youtube.com
    Inhalte von externen Seiten werden ohne Ihre Zustimmung nicht automatisch geladen und angezeigt.
    Durch die Aktivierung der externen Inhalte erklären Sie sich damit einverstanden, dass personenbezogene Daten an Drittplattformen übermittelt werden. Mehr Informationen dazu haben wir in unserer Datenschutzerklärung zur Verfügung gestellt.

    Funktioniert auch in klein.
    Auf seinem Kanal gibt's viel zu lernen.

    Gruß Achim


    HoTT Mx12 - Mx20 - Mc20 - Radiomaster TX16S

    Georg Breusing (Werftaufenthalt), Cap San Diego, Southampton Tug (gepimpt),

    Feuerwehrschiff, Goliath (jeweils 2mot. 160cm Schaffer-Rumpf),

    Aeronaut Victoria, Aeronaut Princess, Aeronaut ANNA 3, Robbe St.Germain,

    Micro Magic, Colin Archer Pipi, Seawind,

    ein paar Flieger.
    http://www.mfsv-bs.de/

  • lauter schöne Dinge die ich hier sehen darf. :sh:<3


    Vielen Dank euch allen für die tollen Rückmeldungen. :d: Bekomme gerade richtig Lust darauf weiterzumachen.


    Grüße

    Leichtmatrose an Neckar, Kocher & Jagst


    In Planung:
    A1414 Glücksburg (Typ 701 C)


    Im Trockendock:
    U.S.S. Iowa (BB-61) 1:200 [Semi-Scale] "the big stick"


    In der Werft:
    U.S.S. New York (LPD-21) 1:200 [Semi-Scale] "never forget"
    robbe "Schütze"

  • gerade richtig Lust darauf weiterzumachen.

    Plan dir Zeit ein, aber es lohnt sich!


    Um mal aus meinem Baubericht zu zitieren:
    " Knoten zuziehen
    und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal und nochmal ....
    ... Stunden später"


    J;0)

    In der Werft: TyneLifeboat, Bootshaus, Slipway 1:20, 9,5m SRB Trainingsboot, 1/72 Severn (Airfix), 1/72 + 1/87 Springer Tug, Shannon 1/12
    Im Hafen:
    Seenotretter Ponton mit Open Ship Diorama 1:20 (Eigenentwurf), 7m SRB GESINA 1:10 - 7m SRB MAX CARSTENSEN 1:20 - 9.5m SRB WILMA SIKORSKI 1:20 - MRB LÜBECK 1:20 - Springer Tug aus PS 1:20 + Schubleichter 1:20, Century 750 Segler
    Wo: www.smc-elmshorn.de ...

  • Moin zusammen,


    nach der im Video, das Achim ( Achim.M) eingestellt hat, gezeigten Anleitung habe ich einmal meinen ersten Rohling angefangen.


    IMG_0601.JPGIMG_0602.JPG


    Es zeigt sich, dass Joerg ( JojoHH) vollkommen Recht hat. :nick: Knoten über Knoten über Knoten ... :kaf1: Und auch das mit der Zeit stimmt. Ich habe hier mal "schnell ein Paar Knoten" geknüpft. :no2: Sieht selbst für mich als Laie nicht gut aus. :gr: Werde dennoch den Fender jetzt erst einmal fertig stellen, mir das Gesamtbild ansehen und dann nochmal für mich bewerten. :kratz:


    In Schreibwarenladen wollte ich ja auch noch mir dickere Schnur besorgen. :id: Die Bratenschnur ist nicht optimal.


    Grüße

    Leichtmatrose an Neckar, Kocher & Jagst


    In Planung:
    A1414 Glücksburg (Typ 701 C)


    Im Trockendock:
    U.S.S. Iowa (BB-61) 1:200 [Semi-Scale] "the big stick"


    In der Werft:
    U.S.S. New York (LPD-21) 1:200 [Semi-Scale] "never forget"
    robbe "Schütze"

  • Moin Mike,
    so schlecht ist das doch gar nicht.
    Such mal im Pflanzenmarkt nach Jute oder Hanfschnur.
    Die musst du dann auch nicht mehr färben.

    Gruß Achim


    HoTT Mx12 - Mx20 - Mc20 - Radiomaster TX16S

    Georg Breusing (Werftaufenthalt), Cap San Diego, Southampton Tug (gepimpt),

    Feuerwehrschiff, Goliath (jeweils 2mot. 160cm Schaffer-Rumpf),

    Aeronaut Victoria, Aeronaut Princess, Aeronaut ANNA 3, Robbe St.Germain,

    Micro Magic, Colin Archer Pipi, Seawind,

    ein paar Flieger.
    http://www.mfsv-bs.de/

  • Moin Achim,


    vielen Dank. :d:


    Ja werde ich machen und einmal danach suchen. :2:


    Färben wäre nicht das Thema, bin leidenschaftlicher Teetrinker, vor allem Schwarztee. <3 Damit kann man schön dunkel einfärben. :nick:


    Grüße

    Leichtmatrose an Neckar, Kocher & Jagst


    In Planung:
    A1414 Glücksburg (Typ 701 C)


    Im Trockendock:
    U.S.S. Iowa (BB-61) 1:200 [Semi-Scale] "the big stick"


    In der Werft:
    U.S.S. New York (LPD-21) 1:200 [Semi-Scale] "never forget"
    robbe "Schütze"

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!